EVER UPS SINLINE RT / RT XL series instruction manual
2017-04-26 12:41
Pomoc Techniczna, tel.: +48 61 6500 400
www.ever.eu
58
SINLINE RT XL 3000
To replace the battery inside the UPS follow these steps:
1.
Switch off the UPS unit.
2.
Disconnect the UPS unit's power cord from the mains (it is
NOT ALLOWED
to
replace the battery when the UPS is connected to the mains).
3.
Disassemble the UPS unit's front panel.
4.
Disconnect the conductors from the front panel (Fig. 21).
5.
Disassemble the battery compartment cover (Fig. 43).
Fig. 43: Disassembling the battery compartment cover.
6.
Use the belt attached to the battery compartment cover to carefully slide out
the batteries from the UPS unit's housing and disconnect the conductors, one
by one (Fig. 44):
SECTION 1
A) the red conductor from the positive (+) terminal of battery no. 1,
b) the black conductors connecting the batteries 1 - 4 in series, namely
connections from the negative (-) terminal of battery no. 1 and the positive (+)
terminal of the next battery, up to the positive (+) terminal of battery no. 4,
c) the black conductor from the negative (-) terminal of battery no. 4.
SECTION 2
a) the red conductor from the positive (+) terminal of battery no. 5,
CAUTION!
Battery replacement can be conducted only when the UPS is
in horizontal position (Rack version). Performing the operation in any
other position may cause damage to the device.
Summary of Contents for SINLINE RT
Page 1: ......
