46
NexLog Recorder User Manual v2.2.0
Figure 28
—Selected Calls in Replay Screen
Once you have selected a group of recordings to form the Incident, touch “Add
selected to incident” from the Menu button, and all marked recordings will be
copied into a working incident. The Replay Summary will indicate “Working
Incident” so you know that the recordings which are now visible in the results
are those which you have specifically put there. An “incident” typically
represents a logical grouping of recordings, arranged according to whatever
criteria you desire. To remove recordings from the incident, first place a check
mark next to them, and then touch “Remove selected from incident” from the
Menu button; the recordings will be removed from the incident. To quickly
remove all recordings from an incident, touch “Clear incident” from the Menu
button.
Save, or open previously saved, incidents from the Menu button. To save an
incident select “Save incident” from the Menu button. A dialog will appear where
you will be asked to supply a name for the incident (and, optionally, to protect
the recordings contained within the incident). Saving an incident allows other
remote clients (such as Eventide MediaWorks) to view and open the incident
when connected to the same Eventide NexLog recorder. To open a previously
saved incident, select “Open incident” from the Menu button and touch the
desired incident name.
Touch “Switch to query” or “Switch to incident” from the Menu button in order
to move back and forth between the “working incident” and the current query.
This allows additional recordings from the query to be added to the working
incident. When viewing the query, any recording from the current query which
already exists in the working incidents is indicated with a grey color.
