__________________________________________________________________________________________________________________
Series GA201-M2
13
LT126 June 2021
Figure 6: Attach Wheel Assembly to Main Base
9. Locate the reflector and hardware bag EH001. Install the Top Reflector on to the Shield Support Arms of the
heater using the carriage bolts (4) with nuts provided. Insert the bolts up through the shield support arms
and then through the top reflector. Secure each bolt on top of the reflector.
Note: Make sure to remove (or peel off) the plastic covering on the reflector before assembly
.
Figure 7: Attach Top Reflector to Shield Support Arms
10. Your patio heater is now assembled and ready to connect to your Propane Gas Supply Cylinder.
WARNING
This Heater is equipped with a tilt / tip switch for your safety. This heater will shut the gas valve if it is tipped
or tilted.
This Heater will not operate at an inclined position. Ensure the heater is in the upright position and should
never be positioned on an incline.