__________________________________________________________________________________________________________________
Series GA201-M2
14
LT126 June 2021
Connecting the Gas Supply
WARNING
For use ONLY with 20# Propane-Gas Cylinders (with a maximum capacity of 8kg [20lb] ) constructed and
marked in accordance with national codes: U.S. Department of Transportation (“DOT” approved) in the USA,
and Standard for Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and Commission,
CAN/CSA-B339 (“TC” approved) in Canada.
1. Lift the Main Housing Cover up by the handles until the bottom lip is clear of the 2 spring latches as shown
below:
Figure 8: Lift Main Housing Cover
2. Secure the Propane-Gas cylinder to the Base using the Bungee cord. Hook one side of the Bungee cord to the
mounting holes on either the right side or the left side, as shown in Figure 9. Make sure the Propane-Gas
cylinder is in the upright position. Feed bungee through the handle of the Propane cylinder, then hook the
bungee on the other set of securing holes.
Figure 9: Secure Propane Cylinder with Mounting Holes and Bungee Cord
