__________________________________________________________________________________________________________________
Series GA201-M2
15
LT126 June 2021
3. Locate the regulator assembly. Look over the assembly to make sure no damage has occurred during shipping
or handling. Attach the regulator assembly to the male quick connect on the fuel supply hose as shown in
Figure 10.
Figure 10: Connect Regulator Assembly to Fuel Supply Hose
4. Secure the Gas Hose Regulator onto the Propane-Gas cylinder valve by turning the Regulator clockwise until
tight. Push the 2 spring latches that are holding the main housing cover in place inwards, one hand holding the
bottom lip of the main housing cover and the other one pushing the latches one at a time. Be careful of the
bottom edge of the main housing as it is sharp.
Figure 11: Secure Gas Regulator to Propane Cylinder
CAUTION
Before using the patio heater:
•
Perform a leak test to make sure the regulator connection does not have leaks.
•
Move heater to desired location.
•
Secure the Base Body to the floor (optional).
Position / Move Heater
1. Ensure the Propane-gas Cylinder is turned
OFF
, secured and disconnected from the Gas Hose prior to
moving the Heater.
2. Ensure the wheels are properly connected to the base body (refer to installation step 8).
