__________________________________________________________________________________________________________________
Series GA201-M2
4
LT126 June 2021
•
This heater shall be used only in a well-ventilated area/space and shall not be used in a building, garages or any
other enclosed area.
•
Never go over connections looking for leaks with a lighted match, cigarette lighter, or any other flame.
•
Perform the Leak Test before initial lighting and when connecting a new Propane-Gas Cylinder. A complete gas
tightness check must be performed at the installation on site due to possible miss handing in shipment or
excessive pressure being applied to the heater.
•
Turn OFF Propane-Gas Cylinder when Heater is not in use.
•
Once the Heater has been shut-down, there shall be a 5-minute complete shutoff period before the Heater
is re-lighted.
•
Ensure the Propane-Gas Cylinder is turned OFF and disconnected prior to moving the Heater.
•
Storage of a Heater indoors is permissible only if the Propane-Gas Cylinder is disconnected and removed from
the Heater.
•
Use caution when moving the Heater, it may require two people to safely manoeuvre depending on the strength /
size of the person(s). Handle ONLY the Pole or Base Body when moving the Heater, handling other components
may result in damage and/or injury.
Propane-Gas Cylinder Caution and Safety
•
Do not store a spare Propane gas cylinder under or near this heater.
•
Never fill the Cylinder beyond 80 percent full.
•
Keep Cylinders upright at all times, even during storage and transport.
•
The pressure regulator and hose assembly
supplied
with the Heater must be used, or the replacement Hose
Assembly
shall be
that specified by the manufacturer.
•
Propane-Gas Cylinders must be stored outdoors in a well-ventilated area out of the reach of children. A
disconnected cylinder must have dust caps tightly installed and must not be stored in a building, garage or any
other enclosed area. Ensure the storage area meets all local fire & safety requirements.
