42
43
SafeZone
TM
Load Leg- (cont.)
CLICK!
CLICK!
CLICK!
CLICK!
Although we recommend
using the base with the
load leg, in some cases it
may not be possible, if it
is not possible you should
store
load leg.
To store load
leg, follow steps below.
To store load leg when you are
not using it, push the button
on the lower portion of the
load leg, slide the lower portion
back up until it locks into place,
then rotate back into the stored
location. The tab on the load
leg foot is pressed into a slot
in the storage location on the
base. And it locks into position.
To store under base, reverse
steps on p. 41.
SafeZone
TM
Load Leg- Storage
5
6
1
2
To extend load leg, pull leg down
until it reaches the floor and the
indicator turns green.
If it does not rest flat on the floor,
push button and lower leg to floor to
extend further. Indicator should turn
green.
ALWAYS CHECK
to make sure when
the leg rests on the vehicle floor that
it does not lift the base off the seat.
Leg must always lock into one of the
open positions before using. If leg
does not lie flat on the floor, move
to another seating location or do not
use the load leg in your vehicle.
4
Recline Indica
tor
Indic
ateur d’inclinaison
1.8-9 k
g (4-2
0 lbs)
9-15
.8 k
g (2
0-35 lbs)
Turn base over and place base
on the seat as shown.
