104
105
REPLACING THE SENSORSAFE
TM
CHEST CLIP
BATTERY.
1. Loosen Harness by pressing Harness Release Button on
the front of the Child Restraint and pulling forward on
both Harness Straps.
2. Unbuckle Harness by pressing the button on the Crotch
Buckle and pulling out both Buckle Tongues.
3. Open Chest Clip by pressing the Release Button and
pulling the Chest Clip apart.
PLACE A
T ARMPIT LEVEL
SENSOR
SAFE
PLACE AT ARMPIT LEVEL
SENSOR
SAFE
PLACE AT ARMPIT LEVEL
SENSOR
SAFE
1
2
3
USING SENSORSAFE
TM
(CONT.)
CR2032
CR2
032
2
1
4
5
a
b
b
c
4. Turn the male side of the Chest Clip over and loosen screws
with a small Phillips screwdriver. Remove the cover
a
.
5. Remove Circuit Board
b
from Chest Clip. Remove
Battery
c
from Circuit Board. Replace Battery with new
Panasonic
TM
CR2032 Lithium button cell Battery, as
shown.
6. Place the Circuit Board with the new Battery in the
Chest Clip. Replace the Cover and tighten the screws.
This completes the battery replacement process.
If you have questions, please contact Evenflo’s ParentLink
at: 1-800-233-2229 in the (U.S) and (Canada), or online
at:
www.evenflogold.com
or
www.evenflogold.ca
USING SENSORSAFE
TM
(CONT.)
Registered tradmarks referenced in this manual are the
property of their respective owners.