5
4
ASSEMBLING YOUR STROLLER
5
Turn the stroller upside down, as shown, so the rear of the
stroller is facing upwards.
Hold the rear wheel/axle assembly
K
so the brake levers
L
face toward the parent’s handle.
Slide the rear wheel/axle assembly onto the stroller frame
M
until each side locks into place with audible clicks.
Pull upward on the rear wheel/axle assembly to make sure it is
locked securely.
3
4
For ease of removal and assembly of clevis pin, use needle nose pliers.
To assemble the rear wheels to the axle, remove clevis pin
G
and one washer
H
from axle, leaving one washer
and rear hub
J
on the axle.
With the spokes facing out, slide a wheel
I
onto the axle. Slide on a second washer
H
.
Insert straight side of clevis pin through hole in axle. Snap hub cap
F
onto wheel.
Pull on wheel to make sure it is locked securely. Repeat steps to attach other rear wheel.
M
L
K
F
G
H
I
J
H
G
H
M
6
Install the child’s tray
P
onto the tray mounts
Q
. Make sure
the tray locks into position with audible clicks. Pull on the
child’s tray to make sure it is locked into place.
To install the canopy
R
, stand behind the stroller and slide
each end of the canopy
S
onto the canopy mounts
T
located on the stroller frame. Make sure each end of the
canopy slides onto the mounts completely.
P
7
Q
T
S
R
ASSEMBLING YOUR STROLLER
Turn the stroller so the front of the stroller is facing
upwards, as shown.
Slide a front wheel assembly
D
into the front frame
leg
E
until it locks into place with an audible click.
Pull downward on the front wheel assembly to make
sure it is locked securely. Repeat for other side.
Turn the stroller right side up onto its wheels.
To remove, push metal button
C
and pull wheel off stroller.
CLICK!
D
E
C
CLICK!
CLICK!