FLIGHT MANUAL
Doc. No. SP2006FMENKT
December 20, 2006
4 - 11
Section 4
Normal
Procedures
NOTE
Carry out ignition check in the following way :
Set engine speed to 4000 RPM. Switch ignition
gradually to L, BOTH, R position and return to
BOTH..
RPM drop with one ignition circuit switched off
must not exceed 300 RPM. Maximum RPM
difference at using one of the
L
or
R
circuits is
120 RPM.
3. Engine instruments
check
4. Control stick
free
5. Wing flaps
take-off pos. (15
°)
6. Trim
NEUTRAL
7. Fuel gauge indicator
check on fuel quantity
8. FUEL SELECTOR
check
LEFT
9. CARBURETTOR PREHEATER (if installed) check function
then OFF
NOTE
If CARBURETTOR PREHEATER is switched ON,
then engine RPM drop reaches approximately
50 RPM
10. Engine instruments
check
11. Flight instruments
check
12. Radiostation / avionics
check, set
13. Ignition
check BOTH
14. Choke
close (in inserted
position)
15. Master switch
check ON
16. Safety harnesses
tighten up
17. Canopy
closed
18. Transponder (if installed)
ON
or
ALT
