A
A
I
I
R
R
P
P
L
L
A
A
N
N
E
E
T
T
E
E
C
C
H
H
N
N
I
I
C
C
A
A
L
L
D
D
E
E
S
S
C
C
R
R
I
I
P
P
T
T
I
I
O
O
N
N
,
,
O
O
P
P
E
E
R
R
A
A
T
T
I
I
N
N
G
G
,
,
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
A
A
N
N
D
D
R
R
E
E
P
P
A
A
I
I
R
R
M
M
A
A
N
N
U
U
A
A
L
L
4-5
Document No.:
EV97SLNOEN
Date of Issue:
02/2008
Revision:
-
Inspection
Tick off performed inspection
Event
#
Event description
after the first
25
hrs.
every
50
hrs.
every
100
hrs.
Carried
out by:
Inspected
by:
3.7.
Cooling system
3.7.1. Visually check radiator for condition and leaks
3.7.2. Visually check condition, attachment of hoses;
radiator left hose clearance from exhaust pipe
min. 0.8 in (20 mm), check system for leaks
3.7.3. Tighten hose clips if needed
3.7.4. Check coolant quantity in the expansion tank -
add or change coolant acc. to the engine manual
if needed
3.7.5. Visually check condition and attachment of
ovewflow bottle on the firewall
3.8.
Lubrication system
3.8.1. Visually check condition and attachment of oil
tank
3.8.2. Check oil cooler for condition, attachment and
leaks
3.8.3. Visually check hoses for condition, leaks,
attachment and security - replace damaged hoses
3.8.4. Check oil quantity - add or change oil acc. to the
engine manual if needed
3.9.
Exhaust system
3.9.1. Visually check exhaust system for condition,
cracks, deformations or damage - repair /
replace. Check left front pipe clearance from
radiator hose - min. 0.8 in (20 mm).
3.9.2. Visually check condition and attachment of the
muffler - repair / replace
3.9.3. Check joint security
3.10. Heating
3.10.1. Visually check hose leading hot air into the cockpit
- check hose for condition, integrity, attachment
and security
3.10.2. Check condition, function and control of the
heating flap
3.11. Reinstall lower engine cowling
Reinstall Upper engine cowling when the
inspection is completed and engine test run
performed
3.12. Lubricate per Lubricating Chart
4.
PROPELLER
see manufacturer instru
4.1.
Blades
4.1.1. Inspect blades for abrasions, cracks, paint
damage, condition of blades leading edges and
tips - repair according to the proppeler manual
4.2.
Spinner
4.2.1. Visually check spinner for condition, abrasions,
cracks, paint damage - repair large damage
4.2.2. Remove spinner
4.3.
Propeller
see manufacturer instru
4.3.1. Check prop attachment, security of bolts
4.3.2. Check run-out
