EVCO S.p.A.
Vcolor 818
| Installer manual ver. 1.1 | Code 144VC818E114
page 16 of 94
3.
Press and release the ON/STAND-BY key (1) and then press the highest interactive key on the left (2) to unlock
the keyboard.
4.
Press and release the ON/STAND-BY (1) key.
If the duration of the power cut has been such to cause the clock error (“
rtc
” code), the real day and time will
have to be reset; see paragraph 11.1 “Setting the real day and time”.
5.3
Switching the device on/off
Operate as follows:
1.
Make sure that the keyboard is not locked and that no procedure is in progress.
2.
Press and release the ON/STAND-BY key.
5.4
The display
During the “stand-by” status the display show the real day and time.
During the “on” status, the device will display the real day and time and the temperature of the cabinet.
