EXP120K1-HT 120KW DC Charger
•
Safety notes
To avoid accidents, read the user manual and installation instructions before using the charger. The “Caution,
Attention, Warning and DangerI instructions in the product manual and on the product itself do not represent all safety
warnings to be taken into account, but are intended to reinforce precautions for use.
During the various equipment operations it is necessary to comply with the National Safety Regulations and to
observe the safety instructions of the equipment provided by
EV-Vision
.
•
Electrical safety
- High voltage
Compliance with National Safety Standards must be complied with during charger installation. Technicians
installing and servicing this equipment must be qualified to work with high DC voltage up to 750 Vdc and three phase AC
voltage up to 500 Vac.
It is stricly forbidden to wear watches, metal bracelets, rings or other electrically conductive objects on your hand,
wrist and body during the installation and maintenance of the equipment.
If there is water inside, the AC power and DC connector should be disconnected immediately. During operations
in humid environments water should not enter the equipment.
During operations, it is stricly forbidden to operate the DC chergar without using a “Prohibited Use” sign.
- Tools
- Lightning storms
The storm creates a strong electromagnetic field, the euqipment will need to be well installed to prevent damage
during lightning.
EV Vision – Porto – Portugal –
www.ev-vision.com
– Support service: (+351) 229 999 230
All rights reserved. This manual may be changed without prior notice. - V 1.0 – 2019/08/10 – Pag. 3 de 25
Summary of Contents for EXP120K1-HT
Page 1: ......
