EXP120K1-HT 120KW DC Charger
After entering the desired value press the OK button to validate and go to the next menu.
The LCD will show the current status between DC charger and EV car. If all parameters entered are correct,
loading will start. At any time the user can cancel the operation by selecting the “CANCEL” button.
The LCD shows all information of its active charging.
You need to wait for charging, when you reach the end you will need to re-pass the RFID cardo or click “CANCEL”
to interrupt the charging process. If you are in OTP mode you must re-enter the password.
After charging is complete, the following menu display a service report ( energy and quantity used, charging time
and final % ). then click on the “BACK” button to return to the loading gun's initial interface of choice.
EV Vision – Porto – Portugal –
www.ev-vision.com
– Support service: (+351) 229 999 230
All rights reserved. This manual may be changed without prior notice. - V 1.0 – 2019/08/10 – Pag. 17 de 25
Summary of Contents for EXP120K1-HT
Page 1: ......
