Page 96/131
July 2021
HE18 | User manual
•
Start the engine (
page 58
) and allow it to warm up.
•
Switch the engine off (
page 59
).
•
Check the coolant level (
page 50
) adding coolant if necessary (
page 93
).
•
Close the engine cover and the side cover.
5.6
Replacing engine oil and oil filter
•
Open the engine cover (
page 87
).
NOTE
Changing the engine oil must be done with a warm engine.
WARNING
Be careful, since the engine oil and the oil filter are hot; there is a danger of being burnt.
ENVIRONMENTAL INFORMATION
Place the oil drain pan with a capacity of about 15 l under the engine oil drain. The engine oil must not get on the
ground; like the oil filter, the oil must be disposed of in accordance with current environment protection
regulations.
5.6.1
Draining the engine oil
•
Remove the oil drain plug (
1
) and drain the engine oil into the drain
pan.
•
Put a new gasket on the oil drain plug and replace it.
5.6.2
Replacing the oil filter
•
Put the oil drain pan under the oil filter (
1
), removing the oil filter with
an oil filter wrench by turning it counterclockwise.
•
Lubricate the gasket ring of the new oil filter with engine oil.
•
Position the oil filter and tighten it by hand; do not used the oil filter
wrench.
Summary of Contents for HE18
Page 128: ...Page 128 131 July 2021 HE18 User manual ELECTRICAL DIAGRAMS 1 Electrical diagram 1 ...
Page 129: ...Page 129 131 July 2021 HE18 User manual 2 Electrical diagram 2 ...
Page 130: ...Page 130 131 July 2021 HE18 User manual 3 Electrical diagram 3 ...
Page 131: ...Page 131 131 July 2021 HE18 User manual 4 Electrical diagram 4 ...
