Page 27/131
July 2021
HE18 | User manual
5.
Loading/Unloading the Excavator with a Crane
CAUTION
Observe this chapter
"SAFETY PROVISIONS" (page 10)
and section
"Safety Provisions for Loading and Unloading
with a Crane" (page 25)
.
•
Position the excavator on a level surface in the lifting position (see diagram).
•
Raise the dozer blade to the stop of the dozer blade cylinder; see also section
"Excavation (using the control elements)" (page 69)
.
•
Align the boom with the longitudinal axis of the superstructure.
•
Extend the bucket cylinder and the arm cylinder to the stop.
•
Extend the bucket cylinder and the boom cylinder to the stop.
•
Turn the superstructure in such a way that the dozer blade is located at the
back.
•
Close and lock the door and the covers.
CAUTION
When lifting the excavator, only the attachment points intended for this must be used. Fastening using other
fastening eyes or points is prohibited and can result is serious damage.
•
Fasten lifting equipment at the fastening eyes (
1
) with shackles on both sides
of the dozer blade.
•
Fasten lifting equipment at the fastening eyes (
1
) with shackles on both sides
of the boom.
•
If the lifting equipment touches the excavator, blankets must be inserted
between the lifting equipment and the excavator to protect the excavator.
•
Always keep the machine horizontal. Make sure the center line of the crane
hook is aligned as accurately as possible with the rotation center of the
excavator and that the lifting hook corresponds with the conditions. Lift the
excavator.
Summary of Contents for HE18
Page 128: ...Page 128 131 July 2021 HE18 User manual ELECTRICAL DIAGRAMS 1 Electrical diagram 1 ...
Page 129: ...Page 129 131 July 2021 HE18 User manual 2 Electrical diagram 2 ...
Page 130: ...Page 130 131 July 2021 HE18 User manual 3 Electrical diagram 3 ...
Page 131: ...Page 131 131 July 2021 HE18 User manual 4 Electrical diagram 4 ...