Eurotrac HE18 User Manual Download Page 14

Page: 14 / 131

Page 14/131

July 2021

HE18 | User manual

1. Risk of injury: liquids under pressure!

•

Leaking hydraulic oil can penetrate the skin. Danger: hot parts can
burn!

•

Surfaces can be hot and inflict burns.

•

Do not cover openings, e.g. vents, and hot parts with your hands.

2. Danger: rotating parts can cut!

•

The rotating fan can inflict cuts to body parts. Danger of becoming
trapped by rotating parts!

•

The rotating belt drive can pull in body parts and trap them.

•

Never grab rotating parts.

3. Fire hazard: hot parts!

•

Leaking liquids can land on hot parts and ignite.

•

Read the operating instructions BEFORE working on the engine.

4. Danger: hot parts can burn!

•

Surfaces can be hot and inflict burns.

•

Do not touch hot parts such as the exhaust, etc.

Summary of Contents for HE18




































































































































Search results

Summary of Contents for HE18

Reviews:

Related manuals for HE18

Brands by name

Popular brands

Eurotrac HE18, User Manual

Search results

Summary of Contents for HE18

Reviews:

Related manuals for HE18

Brands by name

Popular brands