M 2700 / MD27
Record with charging:
Take out the TF card from the device, connect it to the charger or power bank for charging, the red light flashes, and
the blue light will be on when it is fully charged.
If the TF card is inserted the device normally, connect the charger or mobile power supply, and the blue light flashes 3
times to enter the video mode automatically. At this time, you can manually stop recording and switch to any mode. If in
standby mode, there is no operation for 10 seconds, and the device will turn to charging state.
Time setting
1.
）
Upon power on, the device will generate a time file named “TIME.TXT” in the system.
2.
）
TURN OFF the device and connect it to a computer.
3.
）
Locate the “TIME.TXT” file, set the desired time using format 2020-05-18 23:59:59 Y and save the file.
4.
）
Disconnect the device from the computer then turn on the device. The time set is then complete.
If you want to cancel the time stamp.Modify “Y” in “TIME.TXT” file to “N” to disable the time display.The reference
format is as follows:
1: 2020-05-18 23:59:59 Y (with time watermark display)
2: 2020-05-18 23:59:59 N (no time watermark display)
C.
TRANSFERRING RECORDS TO COMPUTER
Connect the camera with the computer through the cable. After successful connection, there would appear a new driver on
the computer. Photos and videos can be found in “PHOTO” or “VIDEO” files and can be copied to the computer.
Note: In case of data loss, please don’t disconnect the cable or take out the memory card when copying photos/videos.
D.
CARE AND MAINTENANCE
Clean the product only with a dry or slightly damp, lint-free cloth.
Do not use abrasive cleaners to clean the unit.
Never expose the unit to direct sunlight.
Do not drop the unit.
E.
FEATURES
- Power supply: 300mAh battery (USB cable included)
- Battery life: 130 minutes
- Video resolution: 1920 x 1080 / 1280 x 720 pixels / 30 IPS
- Video format : AVI / File format: M-JPEG
- Included: charging cable, magnetic stand, computer connection cable
The European directive 2012/19/EU about electronic and electric waste, requires that you can’t throw away defective
domestic appliance with common waste. Used device has to be collect separately to optimize the recuperation rate and the
recycling of the materials to reduce the impact on the health and the environment.
Precision and precautions about the battery use
o
Throwing away a used battery in the environment or with household waste pollutes and avoids the recuperation of
reusable materials.
o
It is important to limit the battery consumption and to respect the following rules:
Favor alkaline battery (last longer than saline battery) and when it’s possible use rechargeable battery.
Leave used batteries and accumulators in adapted containers that you can find in some retailers. In that way, metals
don’t pollute the environment and the health.
o
Battery has to be inserted by respecting the polarity show on the apparel and the battery. An incorrect positioning
can damage the apparel, cause leaking and even provoke fire and the explosion of the battery.
o
To assure a good functioning, battery has to be in a good condition. If there is a problem, put new battery.
o
Never try to recharge battery not made for this. It could leak, warm up, cause fire or explode.
o
Replace all the battery at the same time. Never mix up alkaline battery with saline battery.
o
Used battery has to be removed.
o
Also, remove the battery if you’re not using the apparel for a long time.
