EK-MFR/1 Arch.2573
Rev. E of 22/06/2007
Sh. 31 of 35
501-000658/MN
Eurotek s.r.l.
We have settled, for example, the refresh time parameter on the 30 seconds indicator, so every thirty
seconds the system variables are refreshed. When the refresh countdown is complete the refresh
label is flashing. When a new value is loaded in the variable window (in the example time to exit =
10) the user has then seconds for to confirm the value pushing, using the left mouse button, the Set
box (a message is showed on the output console line). At the end of the then seconds, if the refresh
time is not finished, it is again possible pushing the set box (you can still press set (until new refresh
occurs) message is showed on the output console line); if also the refresh time is at the end, the
system reloaded the previous variable value.
When the settings operations are complete, the new loaded value is visible on the EK-MFR/1
display.
