Eurotek EK-MFR/1 Users Handbooks Download Page 23 | Manualshive

Page: 23 / 35

background image

EK-MFR/1 Arch.2573

Rev. E of 22/06/2007

Sh. 23 of 35

501-000658/MN

Eurotek s.r.l.

7.3.1 Snmpwalk

The snmpwalk command allows to obtain the text file of the entire boards system or the text file of a
single board inserted in the EK-MFR/1 unit. It is possible to obtain also the EK-MFR/1 text file.
To launch the command, it is necessary to insert the next string:

snmpwalk -v1 -c public 192.168.1.7 1.3.6.1.4.1.19222.1.(slot+2)

The syntax of the command line is explains below:

•

snmpwalk :

command name

•

-v1 -c public :

fixed string

•

192.168.1.7 :

IP address of EK-MFR/1 (chapter 5, board menu, network)

•

1.3.6.1.4.1.19222.1.:

fixed string

•

(slot+2) :

the number of the slot (plus 2) with the text file to obtain.

                                                        For example, to obtain a text file of the slot number 4 the label
                                                        (slot+2) will be set to the 6 value.

We suppose to obtain the text file of the EK-UNM/1 board inserted in the slot number 4 of the EK-
MFR/1.
The complete command string to launch will be:

snmpwalk -v1 -c public 192.168.1.7 1.3.6.1.4.1.19222.1.6

and after have pushed the return key, the user can see the following view:

SNMPv2-SMI::enterprises.19222.1.6.1.0 = STRING: "Slot4 EK-UNM/1"
SNMPv2-SMI::enterprises.19222.1.6.2.0 = STRING: "10.5"
SNMPv2-SMI::enterprises.19222.1.6.3.0 = STRING: "29.0"
SNMPv2-SMI::enterprises.19222.1.6.4.0 = STRING: "3/4"
SNMPv2-SMI::enterprises.19222.1.6.5.0 = STRING: "16QAM"
SNMPv2-SMI::enterprises.19222.1.6.6.0 = STRING: "0.35"
SNMPv2-SMI::enterprises.19222.1.6.7.0 = STRING: "int"
SNMPv2-SMI::enterprises.19222.1.6.8.0 = STRING: "yes"
SNMPv2-SMI::enterprises.19222.1.6.9.0 = STRING: " -5.50"
SNMPv2-SMI::enterprises.19222.1.6.10.0 = STRING: "Off"
SNMPv2-SMI::enterprises.19222.1.6.11.0 = STRING: "8190"
SNMPv2-SMI::enterprises.19222.1.6.12.0 = STRING: "IFLL"
SNMPv2-SMI::enterprises.19222.1.6.13.0 = STRING: "Mod"
SNMPv2-SMI::enterprises.19222.1.6.14.0 = STRING: " -5.3"
SNMPv2-SMI::enterprises.19222.1.6.15.0 = STRING: " -8.0"
SNMPv2-SMI::enterprises.19222.1.6.16.0 = STRING: "LT4e-8"
SNMPv2-SMI::enterprises.19222.1.6.17.0 = STRING: "LT4e-8"
SNMPv2-SMI::enterprises.19222.1.6.18.0 = STRING: " Locked"
SNMPv2-SMI::enterprises.19222.1.6.19.0 = STRING: " 48.1"
SNMPv2-SMI::enterprises.19222.1.6.20.0 = STRING: " 4.7"
SNMPv2-SMI::enterprises.19222.1.6.21.0 = STRING: " 3.5"
SNMPv2-SMI::enterprises.19222.1.6.22.0 = STRING: " F"
SNMPv2-SMI::enterprises.19222.1.6.23.0 = STRING: " 1.5"

«
...
21
22
23
24
25
...
»

Summary of Contents for EK-MFR/1




































Reviews:

No comments

Related manuals for EK-MFR/1

Brand: NEC Pages: 98

Brand: E-Tech Pages: 19

Brand: Auriol Pages: 68

Brand: SOUNDMASTER Pages: 5

Brand: Magnavox Pages: 20

Brand: Albrecht Pages: 23

Brand: auna Pages: 18

Brand: Bush Pages: 25

Brand: Brigmton Pages: 14

Brand: Garmin Pages: 174

Brand: Hitachi Pages: 20

Brand: Optimus Pages: 12

Explorer REXE7BL15E

Brand: Radionette Pages: 124

Brand: PERFECTPRO Pages: 15

Brand: PERFECTPRO Pages: 96

Brand: PERFECTPRO Pages: 141

Brand: Hyundai Pages: 16

Brand: Venturer Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands