2009
EUROTECH USER MANUAL
VoIP
2
All
™
Series: 8
❘
16
❘
24 Channel Gateway User Manual
19
Chapter 3.9: Calling from the Cellular to IP PBX
To send calls to the IP PBX or any SIP Server you must register the Gateway in the external SIP
Server.
Registering the Gateway in the external SIP Server
The VoIP
2
ALL’s can connect to an external SIP Server by adding a host in the ‘Hosts’ table.
When the SIP Servers is connected you will be able to make calls from the Gateway to the Host
SIP.
To add a 'Host':
1. Receive a SIP account from the external SIP Server.
2. Open the SIP tab in the VoIP window.
3. Add a new Host to the list with the SIP account’s information:
•
The 'Name' is the chosen name for this host connection.
•
The 'IP Address' is the SIP Server IP address or desired registration name.
•
The 'Port' is the number of the SIP Server port (the default is 5060).
•
The 'User' is the user number or name.
•
The 'Secret' is the authentication password of the SIP account.
•
The 'Register' box, check it to register in the SIP.
4. Click on the next line in the table and press "Save".
5. Press the ‘Register Host’ button, to register the host in the external SIP Server.
6. After a few seconds, Press "Refresh". If the registration succeeded, the Status will show
‘Reg’. If registration failed, it will show 'Not Reg'.
7. Go to the ‘Prefixes’ window and define a prefix for this host.
Fig: Registered Host.
Assigning a prefix for the host
To define what number will call out from the Host, you need to assign a prefix to the Host.
•
Go to the 'Ports' window.
•
From the ports list, select this Host.
•
Setup the prefix of the host to the prefix of the PBX extensions (i.e. if all the PBX
extensions start with the digit 1, then the prefix of the host will be 1).
•
Setup the 'Remove Prefix' to 0.
•
Save the prefix settings.
Dialing to the IP PBX
To call from a cellular mobile phone through Gateway to extension in the IP PBX
•
Dial the number of the SIM card in port 1.
•
Hear a dial tone.
•
Dial the PBX extension number.
•
The Gateway will recognize the prefix of the Host (i.e. 1) and the call will be routed
to the IP PBX.
All manuals and user guides at all-guides.com
