Eurotech BoltGATE 20-31, User Manual

Page: 96 / 98

13 Product maintenance BoltGATE 20-31 User's manual EN
13.1 How to maintain the product
Periodically inspect the product to verify its integrity and to ensure proper operation.
To maintain the product, complete this procedure:
1. Carefully read and understand the instructions contained in the section "Safety-related
information" on page 9
2. Safely remove the power supply.
For more information, refer to: "How to safely remove the power supply" below
3. Verify the installation of the product.
For more information, refer to: "How to verify the installation of the product" below
4. Clean the product.
For more information, refer to: "How to clean the product" below
13.2 How to safely remove the power supply
WARNING
Electric shock hazard
Failure to safely remove the power supply from the product:
l
could result in death or serious injury
l
could damage the equipment or other property.
To safely remove the power supply from the product, complete this procedure:
1. Make sure that your hands are dry
2. Turn OFF all the power supply sources
3. Disconnect all the cables
4. Make sure that all the circuits are discharged.
13.3 How to verify the installation of the product
To verify the installation of the product, complete this procedure:
1. Make sure that the product is clean and not damaged
2. Make sure that the LED indicators are visible and not damaged
3. Make sure that all the locking parts (for example: screws, bolts, nuts) are correctly fastened
4. Make sure that the product is installed correctly.
13.4 How to clean the product
To clean the product, obey these instructions:
l
Do not use detergents, aerosol sprays, solvents or abrasive sponges
l
To remove the dust, use a dry lint-free cloth
l
To remove the dirt, use water-based non-flammable cleaning products.
96 / 98 © 2022 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Code: BTGATE-20-31_MAN_EN_1-6
Revision: 1-6 2022.07.28