EUROSTER Q7TXRX
GW
–
INSTALLATION AND OPERATION MANUAL
5
If several thermostats cooperate with one RX receiver, then the receiver display will
alternately show the information concerning all of the thermostats.
First of all, digit 1 (designating thermostat number one) is displayed followed by the
temperature measured with thermostat number one, then digit 2 is visible followed by the
temperature measured with thermostat number two, etc.
If the receiver does not receive a signal confirming the operation of the thermostat within
15 minutes, the receiver(s) switches off the heating and reverts to the fail safe mode. Letter
A will be displayed and the connected device will be switched on for 20 minutes every 3 h.
2.
BASIC SETTINGS
The main menu consists of three basic items:
MODES (1)
PROGRAMS (2)
SERVICE (3)
The menu items with numbers assigned to them are listed in the table below.
ITEM
NO.
MENU ITEM
ITEM NO. MENU ITEM
1
MODES
101
VACATION
102
AIRING
103
PARTY
104
HOLD
105
ECO
106
EXIT
2
PROGRAMS
201
DAY
202
EDIT
203
COPY
204
EXIT
3
SERVICE
301
OPERATING TIME
302
MANUAL SETTING
303
MODES
304
YEAR TIME
305
ALGORITHM
306
LEARNING
307
HEATING IN ADVANCE
308
ANTI-FREEZE PROTECTION
309
CORRECTION OF SENSORS
310
PIN
311
RESETTING
312
AIR-CONDITIONING
313
EXIT
4
EXIT
The following section describes the most useful functions for users.
a.
Date and time
In order to set the time and date, enter SERVICE (item 3) menu and select YEAR TIME
(item 304).