EUROSTER Q7TXRX
GW
–
INSTALLATION AND OPERATION MANUAL
18
After transferring the technician's own settings, it is enough to pair the thermostat (with the
newly introduced settings) with the new receiver.
3.
RX RECEIVER SETTINGS
–
"PROG" FUNCTION
To modify the settings, hold the left button for over 3 s. "Prog", NO and heating icon will be
displayed. To switch the operation of the receiver to cooperating with air-conditioning (icon),
push the left button shortly. To restore operation in the heating mode (icon), push the left
button shortly again.
To switch the operation of the receiver from NO to NC (which enables switching inversely
without the need to change over the cables), push the right button shortly.
To switch on pairing, hold the middle button longer.
To exit, hold the left button longer.
V. INSTALLATION AND CONNECTION
1.
PROPER PLACE OF INSTALLATION
The thermostat is designed for indoor wall mounting or placing on a stand, at a height of
approximately 1.5 m above the floor.
Avoid places with strong sunlight, near heating or air-conditioning devices, directly by the
doors, windows and other similar locations, where the temperature measurement could be
easily disturbed by external conditions.
Avoid places with poor air circulation, e.g. behind furniture.
Avoid moist places due to the negative effect of moisture on the service life of the device.
2.
OPENING THE THERMOSTAT
The thermostat enclosure consists of two main parts:
•
a base,
•
a front panel with a battery cover.