EUROPRO COMPACT-PRO 60, User Manual

Page: 16 / 36

User manual - COMPACT-PRO 60 & 80 201902-340-ENG P16
5. USE OF THE MACHINE (continued)
5.4. STARTING UP OF THE HIGH PRESSURE WASHER
Before starting-up your high pressure cleaner, you can raise or lower the bin, this will permit the total
cleaning of your machine . Once the bin is in the right position, switch the start-up handle of the cleaner .
Whenever you want, you can change the mixing bin (from bottom to top) .
During the bin movment, you will not have the necessary flow rate for an optimal cleaning, we advise
you not to use the cleaner during this phase .
Once the bin turns back in the other position, you can use the cleaner again .
When cleaning is over:
• Place the cleaner start-up handle on the central position .
• Stop water inlet source and disconnect the supply hose .
• Push the cleaning lance trigger to evacuate the pressure left in the high pressure hose .
• Disconnect the high pressure hose .
• Clean the filter behind the water inlet quick connector.
Always wear appropriate individual protection equipments (glasses, gloves, etc.) in
order to avoid hurting yourself during the cleaning.
This cleaner is exclusively dedicated to the machine cleaning .
For the machine transport, the mixer bin must be in low position .
So, once the cleaning is over, bring back the bin on the rubber pads in low position and
remove the drain plugs .