7) Active „RPM / injection time map” assistant (using the PgUp and PgDown Up Down when
mapping changes the enrichment in the active map area).
8) The program automatically starts to record the oscilloscope signals at each start-up.
9) Possibility of introducing parameters of self-defined non-standard gas injectors.
10) Automated "Mazda leaning" feature (when car switches the injection control strategy from
Sequential to Semi-sequential).
11) Possibility of mixture extra-enrichment during rapid accelerations.
12) Exit from cut-off on gas through reducing the gas injection time during big pressure growth
for a defined number of injection cycles.
13) Possibility of hiding from the end user temporary switchover to petrol.
14) Buzzer signal during switchover between fuels.
15) Protection of multiplier settings after calibration against changes caused by pressing
"Calculate multiplier" button.
16) Opportunity to protect controllers settings with a password.
17) Overlapping fuel cycles when switching (for a set number of cylinders cycles are given
simultaneously petrol and gas).
18) Integration with vehicles equipped with Start & Stop system.
19) More precise method of petrol and gas maps collection.
20) Support of gas and reducer temperature sensor NTC 6.8 kOhm.
21) More fluent sequential switchover between fuels.
22) Possibility of automated emergency start with gas without need to hold the switch button.
23) Possibility to read and view the controller's settings and to preview oscilloscope from the
file without necessity of establishing connection with the controller.
24) Possibility of saving in the controller's memory the size of mounted injector nozzles and five
most recent service maintenance inspections.
25) Constantly visible indicator of the collected calibration maps quality in the whole range of
engine loads.
26) Support of for new switch LED-7 model with built-in buzzer and plug (no need to solder
the harness wiring).
27) Possibility to set separate neutral OBD points for the engine working on idle and at higher
RPM. (
feature available only in OBD CAN SAS
)
28) Support of "inverted" OBD corrections. (
feature available only in OBD CAN SAS
)
5/42
