Attention:
Additive and multiplicative time corrections [ms] (from Corrections bookmark), multiplier
correction [%] (from Calibration bookmark) and correction from RPM [%] (from Map
bookmark) summed together give final gas injectors opening time. The corrections regarding
the gas pressure and gas temperature are also being applied all the time.
Therefore before every another autocalibration we will be reminded by software to restore
default settings to all modified corrections.
3.8. Corrections Panel
This option makes possible to manually change the
Additive
and
Multiplicative
corrections (in ms)
for particular gas injectors. This option is useful especially for „V” type engines when we can
observe differences in petrol injection opening time values between both engine sides after
changing over to gas.
“Additive correction”
-value of this correction (in [ms]) is being added to petrol injection opening
time when car is on gas. That value is a being set by software automatically during autocalibration
process.
“Multiplicative correction”
-petrol injection opening time is being multiplied by this value (in [%])
and result it is being added to petrol injection opening time when car is on gas.
When “
Common correction”
is ON then by modifying
Correction #1
we can set that value for all
remaining cylinders.
27/42
