Euromate VisionAir, User Manual

Page: 15 / 40

User Manual VisionAir air cleaner
15
1 PREFACE
This manual contains instructions for the installation, operation and
maintenance of the air cleaner. The installation and operation of the options
are also described. Read the safety instructions first.
PLEASE NOTE
The packaging also contains the remote control and the
FreeBreeze scent cartridges.
Use of the Manual
This manual is intended as a reference work to enable professional, trained
and authorised users to safely install, operate, service and repair the product
indicated on the front of this document. The figures referred to in the text
can be found at the back of the manual.
Pictograms and Symbols
The following pictograms and symbols are used in this manual and on the
product.
Tips and advice for carrying out the respective work or activity
more easily.
WARNING
Procedures which, if not carried out with the necessary caution,
can result in serious damage to the product or personal injury.
WARNING
Fire hazard! Never use the product for the extraction of
inflammable, glowing or burning particles, substances or
liquids.
Never use the product for the extraction and/or filtration of
aggressive vapours (such as hydrochloric acid) or sharp
particles.
This cleaner may comprise an optional UV light source.
Radiation from this light source is hazardous for the eyes and
skin. Use of this cleaner for other than its intended purpose or
damage to the housing can result in the escape of UV radiation.
Service and Support
For information on specific settings and maintenance or repair work falling
outside the scope of this manual, please contact the supplier of the product.
He will always be happy to help you. Ensure that you have the following data
available:
- Product name
- Serial number
These data can be found on the identification plate.
2 IDENTIFICATION OF THE PRODUCT
The identification plate contains the following data:
A Serial number
B
Product name
C Power
D Connection voltage and frequency
3 GENERAL
PLEASE NOTE
When using electrical appliances, the following fundamental
safety measures must be observed in order to avoid the risk of
electric shock, injury and fire. Read and observe all these
instructions before installing and operating the air cleaner.
General
The manufacturer accepts no liability for damage or injury resulting from a
failure to strictly adhere to these safety precautions and instructions or
carelessness during installation, use, maintenance and repair of the product
specified on the cover of this document and any associated accessories.
The user of the product is solely responsible at all times for observing the
locally applicable safety regulations and directives. Protect the air cleaner
from water or moisture.
4 MOUNTING / INSTALLATION
Follow the installation instructions carefully. Switch off the mains voltage
before installing the air cleaner. Use the prescribed materials for installation.
Connect the air cleaner to the mains power supply only after complete
installation.
Connect the air cleaner only to the prescribed mains voltage and frequency.
Ensure that the mains voltage on site corresponds to the mains voltage
indicated on the rating plate on the inside of the air cleaner.
Use the plug in accordance with the national regulations. Position the air
cleaner so that the mains plug is accessible at all times.
User Manual
•
Every person working on or with the product must be familiar with the
contents of this manual and must strictly observe the instructions
contained at all times. The company management must instruct the
personnel using the manual and ensure that all instructions and
regulations are observed.
• Never change the sequence of the operations to be carried out.
• Keep the manual in the vicinity of the product at all times.
Pictograms and Instructions on the Product
•
Pictograms, warnings and instructions attached to the product form
part of the applicable safety measures. They must not be covered or
removed and must be present during the whole service life of the
product.
• Immediately replace or repair any pictograms, warnings and
instructions that may have become damaged or illegible.
Users
•
Only trained and authorised persons may be allowed to us the product.
Temporary workers and persons undergoing training may only use the
product under the supervision and responsibility of qualified users.
• The device is not intended for use by people (including children) with a
physical, sensory or mental handicap or who lack the necessary
knowledge and experience, unless they are supervised or have been
instructed in the use of the device by a person who is responsible for
their safety.
• Always supervise children to prevent them from playing with the
device.
• Avoid any abnormal postures during installation of the device. Ensure a
secure footing and a stable balance.
• Use your common sense. Stay alert and work with full concentration
during installation. Do not install the device if you are tired or under
the influence of drugs, alcohol or medication.
Safety Equipment
•
All safety equipment must be correctly installed and may only be
removed for maintenance and repair work by qualified and authorised
service technicians.
Contains Lithium batteries, do not discard
Minervum 7324, 4817 ZD Breda, The Netherlands
MANUFACTURED IN 2018
Model: VISIONAIR BL2 EM OW 195W
Ser.Nr.: BL40001 230V/1~/50Hz