23
3)
Then type
linsn
on the keyboard and press enter.
Note:
there is no indication on the screen.
After this a popup appears on the screen, requesting a password.
You should enter the password in the popup. The password is“
168
”.
Then press OK.
If you have entered the correct password, the following hardware-setup appears on the screen:
Sender Setup
The Sender Setup is very simple, you do not need to do any work, if your display operation remains below
1024×768 mode. Otherwise you should choose the display mode and then press “Save to the Sender”
and all will be ok.
Summary of Contents for LED Pixel Mesh
Page 1: ...Copyright Reproduction prohibited Keep this manual for future needs USER MANUAL LED Pixel Mesh...
Page 2: ......
Page 15: ...13...
Page 17: ...15 Backside view Fig 12...
