EuroLite LED Pixel Mesh, User Manual

Page: 26 / 27

24
Receiver Setup
The setup has already been perfected, so users do not need to do any work on the Receiver Setup.
The configuration file is included with the LED Pixel Mesh: Pixel Mesh.RCG
Users can refer to the following steps if they want to alter the configuration
：
Press “Load from files” on the Receiver Setup,
Then press “send to receiver” and “save on receiver” step by step, then input “256” in actual width, and
“128” in actual height, please see above green circle.
The Configuration of Receiver has already done after all that setup is complete.
After load files, suggest
config as following
parameter!!