EuroLite LED Pixel Mesh, User Manual

Page: 16 / 27

14
Sender card
Install the sender card in an available PCI slot in your computer. The sender card is the interface between
your PC, LED Studio and the LED Pixel Mesh. You must use the DVI cable provided to connect from the
computers DVI output to the DVI port on the sender card.
Data Out 1 & Data Out 2 connectors
The 2 network output ports transmit 128 rows or horizontal lines. Output 1 transmits rows/lines 1 throug 128.
output 2 transmits rows/lines 129 through 256.
Aux Port
This is a standard 6-pin telephone connector. A cable is provided that connects from the 9-pin DIN R-232
port to the AUX port on the sender card. This port allows control of the R variable, gray scale, DV Wall
matrix active area, and matrix lock and matrix range.
DC External Power Input
This input takes the 5V power supply provided. It is only used if the sender card will be operated eternally
of the computer.