00043659.DOC, Version 1.1
19/22
When the display shows *SND, the device is in sound controlled mode. To switch to DMX mode, press the
DOWN button.
When the display shows *AUTO, the device is in auto mode. The program runs at a fixed speed, which can
be set under S***.
When the display shows S***, you can choose the desired speed of the internal programs. Default is 51; for
increasing speed press the DOWN button, for decreasing speed press the UP button.
DMX-CONTROLLED OPERATION
You can control the spots individually via your DMX-controller.
DMX-protocol
Channel 1 – Internal Programs, Sound Controlled Mode
Value:
Function:
000 – 009
Off
010 – 029
Program 1
030 – 049
Program 2
050 – 069
Program 3
070 – 089
Program 4
090 – 109
Program 5
110 – 129
Program 6
130 – 149
Program 7
150 – 169
Program 8
170 – 189
Program 9
190 – 209
Program 10
210 – 229
Program 11
230 – 249
Program 12
250 – 255
Sound Controlled Mode
Channel 2 – Master Dimmer
(when Channel 3 on, Channel 2 no function)
Value:
Function:
000 – 009
Off
010 - 255
Dimming from 0 – 100%
Channel 3 – Strobe
Value:
Function:
000 – 009
Off
010 - 069
Flash, with increasing speed
070 – 139
Chasing Flash (left-right) with increasing speed
140 - 209
Chasing Flash (right-left) with increasing speed
210 – 253
Random Flash with increasing speed
254 - 255
On
Channel 4 – Spot 1: red
Value:
Function:
000 – 255
Dimming from 0 – 100%
Channel 5 – Spot 1: green
Value:
Function:
000 – 255
Dimming from 0 – 100%
