00043659.DOC, Version 1.1
21/22
Channel 19 – Spot 6: red
Value:
Function:
000 – 255
Dimming from 0 – 100%
Channel 20 – Spot 6: green
Value:
Function:
000 – 255
Dimming from 0 – 100%
Channel 21 – Spot 6: blue
Value:
Function:
000 – 255
Dimming from 0 – 100%
OPERATION VIA FOOT SWITCH
Connect the foot switch with the LED KLS-406 RGB DMX device via the 5-pin connection cable with plug.
The foot switch can be operated in sound controlled (*SND) or in DMX-controlled (*512) mode.
The default mode is AUTO; every time you start the device, the mode is what you set last time.
Pedal functions are as follows:
Pedal 1:
Preset
- 1 x press = White
- 2 x press = Red
- 3 x press = Green
- 4 x press = Blue
- 5 x press = Cyan
- 6 x press = Yellow
- 7 x press = Violet
- 8 x press = Color change every second in a continuous loop as described above.
- 9 x press = Color fade every 3 seconds in a continuous loop as described above.
Pedal 2:
Sound controlled
Pedal 3:
Freeze
Pedal 4:
Black Out
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
