00116794, Version 1.0
39/56
Setting a Welcome Message
1. Switch off the device.
2. Simultaneously press
SCANNER 6
and
12
and turn the device on
again. After 2 seconds, the LEDs of
SCANNER 6
and
12
will be on.
The controller is now ready for setting a message.
3. Press
SCANNER 6 and 12
to move the cursor on the display.
4. Press
BANK UP/DOWN
to select the desired character.
5. Repeat step 3 and 4 to set further characters.
6. Simultaneously press
SCANNER 6
and
12
to memorize your setting.
To confirm the memory procedure, all LEDs of the controller flash
three times and the device reboots.
7. OPERATION
Introduction
With the controller you can control up to twelve devices with up to 16 DMX channels per device. 30 banks
with each eight programmable scenes are available as program memory. You can program six chases, each
with up to 240 programmed scenes. Control is done via eight faders and further function buttons. You can
very easily control pan and tilt of a scanner using the joystick.
LCD Display
The display indicates 2 x 8 characters with the following functions:
Display (example)
Function
CHASE5
Chase 5 is activated
STEP002
Second step of a chase
DATA168
DMX value (000-255)
WT:1M36S
The current waiting time is 1 minute and 36 seconds
TP:5.32S
The time interval between the last two Tap keystrokes
is 5.32 seconds
FT:10.5S
The fade time is 10.5 seconds
ASS 07 08
Assign DMX channels 7 and 8
RES 10 13
Reverse DMX channels 10 and 13
SN6
Scene 6
BK 03
Bank 03
