00116794, Version 1.0
38/56
Deleting DMX Settings for Pan/Tilt of a Scanner
1. Activate the Assign or Reverse mode with the buttons
MODE
and
FINE
.
3. Use one of the
SCANNERS
buttons to select the scanner you want to delete.
4. Simultaneously press
AUTO/DEL
and
MODE
. All LEDs will flash briefly to
confirm the deleting.
Deleting all DMX Settings
1. Switch off the device.
2. Simultaneously press
AUTO/DEL
and
MODE
and turn the device on again.
All LEDs will flash briefly to confirm the deleting. All assigned or reversed
channels are reset.
Indicating DMX Channels of a Scanner
1. Simultaneously press
MODE
and
FINE
, the LED
ASSIGN
is lit. If you press
both buttons again the LED ASSIGN goes out and the LED REVERSE lights
up.
2. By pressing the
SCANNERS
buttons you can let the display indicate the Pan
and Tilt channels of the respective scanner.
