EUROCOM Notebook V09.1.00BETA, User Manual, Page: 78 / 274

BIOS Utilities
5 - 4 The Setup Program
5
The Setup Program
The Phoenix SecureCore(tm) Setup Utility tells the system how to configure itself
and manage basic features and subsystems (e.g. port configuration).
Entering Setup
To enter Setup , turn on the computer and press F2 during the POST . The prompt
( Press F2 to Enter Setup ) seen on page 5 - 2 is usually present for a few seconds
after you turn on the system. If you get a “Keyboard Error”, (usually because you
pressed
F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination and
then hold down F2 when prompted. The Setup main menu will appear.