manualshive.com logo in svg

EUROCOM Notebook V09.1.00BETA, User Manual, Page: 243 / 274

Share
Download
EUROCOM Notebook V09.1.00BETA User Manual Download Page 243

Windows XP Information

Bluetooth Module D - 35

D

Bluetooth Module

The operating system’s 

Bluetooth Devices

 control panel is used to configure the Bluetooth settings in 

Windows

XP

, and therefore does not require a driver. 

Use the Fn + F12 key combination

 (see

 

“Function Keys & Visual

Indicators” on page D - 5

).

Bluetooth Data Transfer

Note that transferring data between the computer and a
Bluetooth enabled device is supported 

in one direction

only (simultaneous data transfer is not supported)

. 

Therefore if you are copying a file from your computer to
a Bluetooth enabled device, you will not be able to copy
a file from the Bluetooth enabled device to your comput-
er until the file transfer process from the computer has
been completed.

Summary of Contents for Notebook V09.1.00BETA



















































































































































































































































































Reviews:

No comments