manualshive.com logo in svg

EUROCOM Notebook V09.1.00BETA, User Manual, Page: 236 / 274

Share
Download
EUROCOM Notebook V09.1.00BETA User Manual Download Page 236

Windows XP Information

D - 28 Driver Installation

D

Driver Installation

Insert the 

Device Drivers & Uti User’s Manual

disc

,

 click 

Install Drivers/Option Drivers

 (button) and

then click the appropriate driver name from the

 Drivers

Installer 

menu.

 

Follow the instructions

 

to install the

driver.

Figure D - 17

 - Drivers Installer Screen 1

1.

Check the driver installation order from 

Table D - 3

 (

the 

drivers must be installed in this order

) which is the 

same as that listed in the 

Drivers Installer

 menu 

below.

2.

Click to select the driver you wish to install, after 
installing each driver it will become greyed out (if you 
need to reinstall any driver, click the 

Unlock

 button).

3.

Follow the instructions for each individual driver 
installation procedure as listed on the following pages.

Figure D - 18

 - Drivers Installer Screen 2

Summary of Contents for Notebook V09.1.00BETA



















































































































































































































































































Reviews:

No comments