manualshive.com logo in svg

EUROCOM Notebook V09.1.00BETA, User Manual, Page: 214 / 274

Share
Download
EUROCOM Notebook V09.1.00BETA User Manual Download Page 214

Windows XP Information

D - 6 Audio Features

D

Audio Features

You can configure the audio options on your computer from the 

Sounds and Audio Devices 

 Windows 

con-

trol panel, or from the 

Realtek HD Audio Manager 

 icon in the taskbar/control panel (this will bring up the

Realtek Audio Configuration menus). The volume may also be adjusted by means of the 

Fn

 + 

F5/F6

 key com-

bination.

Figure D - 4

 - Realtek Audio Configuration Menus

Sound Volume Adjustment

How high the sound volume can be
set depends on the setting of the vol-
ume control within 

Windows

 (and the

volume control function keys on the
computer). Click the Volume icon on
the taskbar to check the setting.

Summary of Contents for Notebook V09.1.00BETA



















































































































































































































































































Reviews:

No comments