EUROCOM Notebook V09.1.00BETA, User Manual, Page: 251 / 274

Windows XP Information
Trusted Platform Module D - 43
D
Initializing TPM
1. To initialize the TPM it may be necessary to first clear any existing TPM information
if applicable.
2. Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST .
3. Use the arrow keys to select the TPM State menu.
4. Select TPM State , and set the item to Clear .
5. Press F10 to save the changed BIOS information, exit the BIOS and restart the
computer.
6. If you make any changes to the TPM State you will be asked to Execute/Reject the
change after restart ( “Physical Presence Operations” on page 5 - 13 ).
Figure D - 27
TPM State - Clear
Main Advanced Security Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Changes TPM State
TPM State
Current TPM State: Enabled and Deactivated
Change TPM State [ Clear ]
No Change
Enable & Activate
Deactivate & Disable
Clear
Phoenix TrustedCore(tm) Setup Utility