Eurocave Vin au Verre 8.0, User Manual

Page: 9 / 24

-9-
GB
3. CONNECTING THE NITROGEN CYLINDER
Please note: the nitrogen cylinder is connected via the back of the product – remember to connect it up before flush-fitting the appliance or before
access to the back becomes complicated.
Nitrogen
cylinder type
Maximum
pressure
Characteristics
of the cylinder outlet
Pressure
reducer
Location of the
nitrogen cylinder
Aligal 1 250 bar Connection complies with
standard NFE29- 650/C
(female connection on the right,
Ø 21.7 mm, thread 1.814 mm, SI
thread form) The pressure reducer is set by
the manufacturer at the correct
pressure: 0.6 - 0.7 bars (gauge
pressure)
It is not necessary to change
the pressure.
A 3 m tube is supplied
> Install the cylinder at a distance
permitted by the length of this
tube.
5
1
2
3
6
4
0,6 - 0,7 bar
1. Remove the safety cap
2. Place the pressure reducer on the nitrogen
cylinder
3. Screw down using the pressure reducer
wrench
4. Connect the supply pipe to the pressure
reducer
5. Connect this pipe to the appliance
6. Open the nitrogen cylinder. The pressure
must be 0.6 - 0.7 bars.
4. INSTALLING THE DRIP PAN
1. Unscrew the 2 screws located at the ends of the product, near the recesses, using a T25 Torx wrench
2. Insert the pan’s 2 support brackets and screw down.
3. Use a spirit level to check the horizontality of the brackets
4. Fit the drip pan onto the brackets by inserting the tabs into the slots and push against the product. The drip pan is magnetic and will be automatically
attracted to the product.
It is important to check the horizontality of the brackets to prevent the drip pan from scraping against the doors.
According to the country the product will be installed in, it is necessary to have a pressure reducer that corresponds to your gas cylinder.
Country Type of pressure reducer connection
France, Spain, Singapore, Mexico, Israel, Belgium, UAE, Greece NFE29- 650/C (female connection on the right, Ø 21.7 mm, thread 1.814
mm, SI thread form)
Morocco, Tunisia CGA 580 -M24 x 1.5 - MALE
United Kingdom, Hong Kong, India, Taiwan, Thailand, Indonesia, Argentina,
Ireland, New Zealand, Vietnam, South Africa, Portugal BS341 - G5/8” - MALE
Germany, the Netherlands, Denmark, Switzerland, Finland, Austria,
Norway, Sweden, Luxembourg DIN 477 N°10 - W 24.32 -1/4’’ RH - FEMALE
Australia Type 50 - W24 x 2 - FEMALE
Japan JIS B 8244 - W22x1/14’’ -FEMALE
China G5/8” - FEMALE
Italy W21,7x1/14’’- MALE
6 ° C
16 ° C
3cl
6cl
15cl
T25
1
x 2
T25
2
x 2
3
6 ° C
16 ° C
3cl
6cl
15cl 3
4
T25