Eurocave Vin au Verre 8.0, User Manual

Page: 16 / 24

-16-
GB
1
From the welcome screen, access the Settings menu
Enter your “manager access” password and press
Then select
2
x8 x8
Select the bottle(s) for which
you want to set the measures.
This indicator light
indicates that the bottle has
been selected. Press the
indicator light to deselect it.
Then confirm .
Tip : if you want the 3 measures of the 8 taps to all have
identical settings (example: 3, 6 12 cl for the 3 measures of
all 8 taps), tick
to set them all in one go.
3
3 2
3,5
6,5
cl
6
cl
12 cl
€
€
€
3 measures can be set for
each of the 8 taps. Indicate
the amount in centilitres or
ounces and the price per
glass for each of the
measures.
Then confirm .
Tips :
• The volumes of the measures to be entered must be between
1 cl (1 oz) and the total volume of the bottle inserted.
• Delete the content of the cell by pressing before entering
the value.
• For the price of the glass, it is necessary to enter the values
decimally. Example for €5: enter 5-0-0
• By indicating the price of the glass, you can find out how
much wine has been consumed and the turnover generated
by the label in the
Statistics Menu .
• If the total volume of the glasses served is the same volume
as the bottle, then splashes may appear on the last glass of
wine served
.
2. SETTING MEASURES
By default, the 3 measures of each Vin au Verre 8.0 tap are set at 3, 6 and 12 cl.
3. TEMPERATURE SETTING
Important : Ensure that the temperature in compartment 2 (right-
hand compartment) is higher by 3°C (5°F) than that of compartment
1 (left-hand compartment) The recommended temperature ranges are:
- Left-hand compartment: 6 - 15°C / 43-59°F
- Right-hand compartment: 9 - 18°C / 48-64°F
1
From the welcome screen, access the Settings menu
Enter your “manager access” password and press
Then select
2
18
6
T2 ≥ (T1 + 3°C)
T2
T1
°C °C
Set the temperatures in the
two compartments using Δ
and
and
Then confirm .
Important : check the condition of the bottle neck before
inserting a bottle.
5 Open your new bottle and put
it in the position of the old
one, inserting the tube into
the bottle. Push upwards,
then forwards whilst keeping
it in the upper position.
And confirm .
Some bottles may need
securing. To do so, raise the support disk so that it is touching
the bottle, but do not apply force.
6
PRODUCT NAME
PRODUCT VOLUME
chateau ...
75
cl
Indicate the name of the
label and the volume of
the bottle.
Then confirm .
If you do not want to replace an empty bottle immediately,
to make the warning message disappear, go to
or
when entering information about the bottle, and
enter “0” or nothing.