Eurocave Vin au Verre 8.0, User Manual

Page: 17 / 24

-17-
GB
4. APPLIANCE LIGHTING
From the welcome screen, access the Settings menu
Enter your “manager access” password and press . Then select
For lighting the taps:
Select:
Choose the colour of the lighting by pressing
Then, set the intensity by pressing
And confirm .
For lighting the compartments:
Select:
Choose the colour of the lighting by pressing
Then, set the intensity by pressing
Proceed in the same way for the second compartment,
and confirm
.
Tip : By selecting
, the lighting options used for the last
compartment set will be applied identically in the other compartment.
Tips : • Hold down the arrow to scroll quickly.
• You can opt for the automatic “colour sequence” option by selecting . The lighting will automatically change from one
colour to another.
• If the arrows allowing you to choose the colour and intensity of the lighting do not appear, it means that the automatic colour
sequence mode is activated. Press to disable it.
5. SALES STATISTICS
From the welcome screen, access the Settings menu
Enter your “manager access” password and press
Then select
TODAY
Label
TOTAL
Amount
of glasses
Volume
in liters
Turnover
Choose the period that you want
to select for analysing your sales:
“Today”, “past 7 days” or “past 30
days”.
Then confirm
.
Your statistics will appear on the
screen. You can scroll through all
of the bottles by pressing
.
Tips : it is possible to delete all of the statistics held by the
appliance by pressing DEL. You will be asked for the “manager
password” to confirm the procedure. Please note: data will be
permanently deleted.
Statistics can be consulted but not exported.
6. REPLACING THE NITROGEN CYLINDER
When the nitrogen cylinder is empty, the “Nitrogen cylinder empty” message will appear on the screen.
Tip : remember to regularly check the nitrogen cylinder level on the pressure gauge. The indicator light will flash on the screen every 15 days.
When the level displayed is below 30 bars, remember to order a new cylinder.
1
Disconnect
the cylinder
Disconnect the cylinder.
To do so, close the nitrogen
cylinder then unscrew using
the pressure reducer wrench
(follow the connection
process explained in Section
III.3 in reverse) 2 Connect the new cylinder by following the explanations in III.3.
3
Open
the cylinder
Open the cylinder.
Check the pressure on the
output pressure gauge (refer
to. III.3).