www.euroboor.com
20
5. Maintenance
Your EUROBOOR Power Station has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon proper care and regular
cleaning.
CAUTION:
To reduce the risk of injury, turn off the Power Station before adjusting or changing
set- ups or when making repairs.
VISUALLY CHECK THE DEVICE FOR DAMAGE
The Power Station must be checked before operation for any signs of damage that will affect the
operation of the machine. Particular notice must be taken of the mains cable, switches and plugs. If
the Power Station appears to be damaged it should not be used. Failure to do so may cause injury or
death.
CLEANING
•
Clean all dirt, dust and metal chips from the machine regularly. The use of compressed air is
advised. Never remove metal chips with bare hands!
•
Blow dirt and dust out of the housing with compressed air as often as dirt is seen collecting in
and around the air vents. Wear approved eye protection and an approved dust mask.
•
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool.
These chemicals may weaken the materials used in these parts. Use a cloth dampened only
with water and mild soap. Never let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
