www.euroboor.com
17
3. Prior to use
Prior to any use, check the Power Station and all of its components for damage. If any parts seem
damaged, the Power Station cannot be used.
All parts must be correctly installed and must fulfil all conditions necessary to ensure perfect operation
of the machine.
A damaged and/or incorrectly functioning machine must be repaired or replaced according the original
specifications by EUROBOOR or any authorised EUROBOOR dealer or service point.
DO NOT
use under wet conditions or in presence of flammable liquids or gases.
DO NOT
let children come into contact with the machine. Supervision is required when inexperienced
operators use this Power Station or any connected device.
ELECTRICAL SAFETY
The machine electronics have been designed for one voltage only. Always check that the power supply
corresponds to the voltage on the rating label.
EUROBOOR PST.2500 is designed in class II (double isolated). Earth grounding is not required.
The charger is designed in class I. Earth grounding is required.
If the power supply cord is damaged, it must be replaced by a specially prepared cord available through
the EUROBOOR service organisation.
EXTENSION CABLE
If an extension cable is required for the charger, use an approved grounded extension cable. The
minimum conductor size is 2.5 mm²; the maximum length is 30 meter. When using a cable reel, always
unwind the cable completely.