www.euroboor.com
13
2.5 Indicational unload times
The theoretical unload time of the PST.2500 can be calculated for each connected device as follows:
Battery capacity (Wh) / Power consumption (W)
However, there are many factors that can cause the actual unload times to deviate from the theoretical
unload times. These can be, amongst others:
•
Actual charge level of the Power Station (100% = full)
•
The actual power consumption of a connected device under load, usually higher
•
Power Station battery efficiency
•
Number of charging cycles already performed
•
Low temperatures
This means that the unload time of the Power Station can be different for each machine, and under
each circumstance. For indicational unload times with a fully charged Power Station with an unloaded
device please see the table below:
EUROBOOR
Machine
Rated Total Power
(No Load)
Tested Average Power
Consumption (No Load)
Max. Unload Time
ECO.30S+
950 W
402 W
± 5:30 hrs
ECO.32+
1,050 W
352 W
± 6:15 hrs
ECO.36+
1,100 W
442 W
± 5:00 hrs
ECO.40/2+
1,100 W
403 W
± 5:30 hrs
ECO.40S+
1,200 W
470 W
± 4:30 hrs
ECO.50S+
1,350 W
528 W
± 4:15 hrs
ECO.50+/T
1,375 W
245 W
± 10:30 hrs
ECO.55S+/T
1,700 W
297 W
± 9:00 hrs
ECO.55S+/TA
1,700 W
311 W
± 8:15 hrs
ECO.60S+
1,700 W
338 W
± 6:45 hrs
ECO.80S+
1,800 W
485 W
± 4:30 hrs
ECO.100S+/T(D)
2,050 W
354 W
± 7:15 hrs
VAC.50S+
1,300 W
503 W
± 4:15 hrs
B45S
1,250 W
254 W
± 12:30 hrs
B60
1,100 W
292 W
± 7:30 hrs
B60S
1,800 W
168 W
± 13:15 hrs
EDG.600
600 W
182 W
± 17:15 hrs
DISCLAIMER:
Above mentioned values are purely indicational. EUROBOOR accepts no liability
when estimated working hours are not achieved.
