Always make sure that the machine is unplugged from power source and
the main switch is on "O" when the machine is not in use and before
inserting or removing parts.
- This machine is equipped with a polarized plug which must be used
with an appropriate electrical outlet.
- Connect the machine to a power source as illustrated (1).
- The power switch is located above the terminal box. Your machine will
not operate unless this switch is on " I ". (1)
- Sewing light turns on automatically when the main switch is on " I ".
- To start the machine, press on the foot control (2). The speed of the
machine is regulated by the amount of pressure exerted on the foot
control.
Consult a qualified electrician if in doubt as to connect machine to power
source. Unplug power cord when machine is not in use.
The appliance must be used with the foot controller 4C-316B (110-120V
area)/ 4C-316C (220-240V area) manufactured by MATSUSHITA
ELECTRIC (TAIWAN) CO., LTD.
a. Polarized attachment plug
b. Conductor intended to be grounded
Caution:
Attention:
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If it does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way. (3)
1
a
b
6
A
Connecting machine to power source
B
2
3
All manuals and user guides at all-guides.com
