EunSung HydraBeauty, Operator'S Manual, Page: 16 / 28

HYDRABEAUTY 16
4. Product installation
1. Place the connection parts for installing the large storage tank (hereinafter referred to as the storage tank)
in the connecting hole, and push the storage tank groove all the way to the end. When separating, hold the
handle firmly and pull it lightly.
-Connection parts for
waste container -
-
4.5 Installation of main body & large waste container
-Container has installed correctly-
-Connection parts for
waste container on the
mainbody-
!
CAUTION
The container must be pushed fully into place to exactly coincide with the connecting parts.
If not correctly installed, the valve pressure is decreased and may cause the device to be
damaged.
1. Connect the power cable to power socket at the rear-side of the body, and start the system by pressing the
switch at the top with the switch O (OFF) and l (ON).
4.6 Power supply
-Power on-
-Power off-