EunSung HydraBeauty, Operator'S Manual, Page: 10 / 28

HYDRABEAUTY 10
1. This device must be installed by an educated or licensed person in Eunsung Global Corp.
2. Before installation the device, taking into consideration its position and space, and at appropriate distances
from the device or other medical device that generates heat
3. Install in well-ventilated place with good temperature and humidity and avoid direct sunlight and high
humidity.
4.1 Outlines
4. Product installation
1. Position the device main body on the flat place, match the aqua handpiece cable exactly to the right hand
(when viewed from the front) connector hole and push the handpiece until an audible " click " is heard.
4.2 Handpiece installation
4.2.1 Aqua handpiece installation
- Handpiece connector hole-
- Installed-
1. Place the peeling handpiece on the left side of the main body and connect it to the connector located on
the right side of the connector.
2. Align the square mark on the connector with the triangle mark on the cable and push in until an audible
click is heard.
3. Place the EP handpiece on the left side of the body and connect it to the connector located on the left
side of the hanger.
4. After connecting the cables, turn the locking screw to the right to fully fix it.
-Left side hanger of main body-
-Peeling handpiece connection-
4.2.2 Peeling handpiece & EP handpiece Installation
-EP handpiece connection-