EunSung HydraBeauty, Operator'S Manual, Page: 14 / 28

HYDRABEAUTY 14
1. Open the cover at the front of the body and connect it to the connector part of solutions 1, 2, and 3,
which is starting from the left, and turn the cover counterclockwise to connect each hose. Solution 1, 2,
and 3 bottles are installed when the device is new. Then remove and mix the solution concentration with
distilled water together and connect them to the main body.
4.4 Installation of main body & solution bottles
4. Product installation
-All 3 solutions are installed correctly- -Place for solution1, 2, 3 -
2. Solution 4 (for clanging mode) is connected separately to the rear of the main body. After you adjust the
connection part exactly, turn it counterclockwise to tighten it in order to connect it to the hose.
-Solution 4 is installed correctly-